


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| تبصرہ | Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance. |
| انٹرفیس | RS-232C 1 channel |
| خالص وزن | 10 g approx. |
| پارٹ نمبر | AFP0HCCS1 |
| پروڈکٹ کا نام | FP0H communication cassettes |
| پروڈکٹ نمبر | AFP0HCCS1 |
| اسٹیشنوں کی تعداد | - |
| ہم وقت ساز طریقہ | Start-stop synchronization system |
| مواصلات کی رفتار | 1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec.(Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down.Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| مواصلات کا طریقہ | Half-duplex system |
| ترسیل کا فاصلہ | Max. 15 m49.213 ft |
| ڈیٹا ٹرانسمیشن آرڈر | Transmit from bit 0 in character units. |
| مواصلات کی ترتیب | 1 : 1 communication |
| ٹرانسمیشن فارمیٹ: برابری۔ | none / odd / even |
| ٹرانسمیشن فارمیٹ: اینڈ کوڈ | CR / CR + LF / none / ETX / Time (0 to 100 ms) |
| ٹرانسمیشن فارمیٹ: سٹاپ بٹ | 1 bit / 2 bits |
| ٹرانسمیشن فارمیٹ: کوڈ شروع کریں۔ | with STX / without STX |
| ٹرانسمیشن فارمیٹ: ڈیٹا کی لمبائی | 7 bits / 8 bits |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ