سروس کا وقت: پیر سے جمعہ صبح 9:00 سے شام 6:00 تک
BSE-MAG - BSE-MAG CARLO GAVAZZI Selected parameters Others TYPE Magnet sensor HOUSING Ø11x68 POWER SUPPLY Bus-powered ..
اسٹاک میں ہاٹ پروڈکٹ

BSE-MAG

BSE-MAG CARLO GAVAZZI Selected parameters Others TYPE Magnet sensor HOUSING Ø11x68 POWER SUPPLY Bus-powered ..

$0.00امریکی ڈالر
4667 اسٹاک میں
سپلائر کی معلومات
CARLO GAVAZZI
CARLO GAVAZZI
پروڈکٹس: 10094
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت

پروڈکٹ کی وضاحت

More details
اہم خصوصیات
  • صنعتی معیار
  • RoHS کے مطابق
  • سی ای سرٹیفائیڈ
  • 1 سال کی وارنٹی

تکنیکی تفصیلات

Transmitter with Magnetic Prox. Switch FunctionBSE-MAGABS housing, cylindricalØ11 housingSensing distance: 8 mmSupplied by smart-house1.5 m. cableChannel coding by BGP-COD-BAT with ADAPT 1605GENERAL SPECIFICATIONSEnvironmentDegreeof protection IP 67Pollutiondegree 3 (IEC 60664)Operating temperature -20° to +50°C (-4° to +122°F) Storage temperature-20° to +70°C (-4° to +158°F)Mechanical resistanceShock15 G (11 ms) Vibration 2 G (6 to 55 Hz)MaterialHousingPBT VALOX 325M BackPBT VALOX 325M Front PBT VALOX 325M Cable typePVC, grey, oil proof,4 x 34 mm2Cable length 1.5 mWeight 40 gINPUT SPECIFICATIONSREDUCTION FACTORSInputs Magneticproximity switchNominalsensing distanceSn8 mmOperating sensing distanceSa5 mm ≤Sa ≤ 15 mmRelease distance ≤ 30 mmResponse time≤ 1 pulse trainThe nominal sensing distance is reduced by the use of metal and alloys otherthanST 37. Most importantreduction factors for the inductive proximity switch are:Stainless steel0.6 x Sn Brass0.4 x Sn Aluminium 0.3 x Sn Copper0.2 x SnSUPPLY SPECIFICATIONSPower supply Suppliedby smart-houseReverse polarity protection YesRated operational current Typ. 550 µATYPE SELECTIONHousingNominal sensing Ordering no. 1 channeldiameter distance (Sn)magnet-operated proximity switchØ 11 mm 8 mm BSE-MAGMODE OF OPERATIONWIRING DIAGRAMTheBSE-MAGis anordinarymagnetic proximityswitch,butwitha built-in smart-house transmitter.Oncea magnetis broughtwithinsensingdistanceof themagnetic proximity switch, the channel in questionis activated.Whenthe distancebetween magnetand transmitterexceeds30 mm, the channel in questionis deactivated.Several transmitters codedto the same channel may be used within an application. In this case the channel turns ON if one of the connected magneticproximity switchesis activated.It is necessaryto use the wire adapterbox, ADAPT 1605, together with the programming unit, BGP-COD-BAT, in order to program the channel.Note:After programming, the white, black and blue wires must be connect- ed to smart-house ground.BrownD + D -BlueWhiteBlackSpecificationsare subjectto changewithoutnotice(12.09.2007) - A productof the CARLO GAVAZZI Group

پروڈکٹ دستاویزات

ڈیٹا شیٹ

تکنیکی تفصیلات اور کارکردگی کے ڈیٹا

یوزر مینول

انسٹالیشن اور آپریشن گائیڈ

Top