CJ04-2

100W Single Output Switching Power Supply 100W Single Output Switching Power Supply100W Single Output Switching Power SupplyFeatures : Features :Features : HLG-100Hseries HLG-100HseriesHLG-100Hseries F110 F110F110 Universal AC input / Full range (up to 305VAC) Universal AC input / Full range (up to 305VAC)Universal AC input / Full range (up to 305VAC) Built-in active PFC function Built-in active PFC functionBuilt-in active PFC function High efficiency up to 93% High efficiency up to 93%High efficiency up to 93% Protections: Short circuit / Overcurrent / Overvoltage / Overtemperature Protections: Short circuit / Overcurrent / Overvoltage / OvertemperatureProtections: Short circuit / Overcurrent / Overvoltage / Overtemperature Cooling by freeair convection Cooling by freeair convectionCooling by freeair convection OCP point adjustable through output cable or internal potentiometer OCP point adjustable through output cable or internal potentiometerOCP point adjustable through output cable or internal potentiometer IP67/ IP65design for indooror outdoor installations IP67/ IP65design for indooror outdoor installationsIP67/ IP65design for indooror outdoor installations Class 2 power unit Class 2 power unitClass 2 power unit TypeHL LED Driver for use in Class I, TypeHL LED Driver for use in Class I,TypeHL LED Driver for use in Class I, Division 2 hazardous location luminaires Division 2 hazardous location luminairesDivision 2 hazardous location luminaires Three in onedimming function(1810Vdc or PWM signal or resistance) Three in onedimming function(1810Vdc or PWM signal or resistance)Three in onedimming function(1810Vdc or PWM signal or resistance) Suitable for LED lighting andstreet lighting applications Suitable for LED lighting andstreet lighting applicationsSuitable for LED lighting andstreet lighting applications Compliance to worldwide safety regulations for lighting Compliance to worldwide safety regulations for lightingCompliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations Suitable for dry / damp / wet locationsSuitable for dry / damp / wet locations 7 years warranty (Note.10) 7 years warranty (Note.10)7 years warranty (Note.10)M MSELV IP65 IP67 M MSELV IP65 IP67M MSELV IP65 IP67 Type HL Type HLType HLHLG-100H-20A HLG-100H-20AHLG-100H-20ABlank : IP67rated. Cable for I/O connection. Blank : IP67rated. Cable for I/O connection.Blank : IP67rated. Cable for I/O connection. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer.A : IP65rated. Output voltage andconstant current level canbe adjusted through internal potentiometer. B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details. B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details.B : IP67 rated.Constant current level adjustable through output cablewith 1810Vdc or 10V PWM signal or resistance. D (option, safety pending) : IP67 rated.Timer dimming function, contactMEAN WELL for details.SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL HLG-100H-20 HLG-100H-20HLG-100H-20 HLG-100H-24 HLG-100H-24HLG-100H-24 HLG-100H-30 HLG-100H-30HLG-100H-30 HLG-100H-36 HLG-100H-36HLG-100H-36 HLG-100H-42 HLG-100H-42HLG-100H-42 HLG-100H-48 HLG-100H-48HLG-100H-48 HLG-100H-54 HLG-100H-54HLG-100H-54 DC VOLTAGE DC VOLTAGEDC VOLTAGE 20V 20V20V 24V30V36V 24V30V36V24V30V36V 42V 42V42V 48V 48V48V 54V 54V54V CONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V CONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36VCONSTANT CURRENT REGION Note.4 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 21 ~ 42V21 ~ 42V 24 ~ 48V 27 ~ 54V 24 ~ 48V 27 ~ 54V24 ~ 48V 27 ~ 54V RATED CURRENT RATED POWER RATED CURRENT RATED POWERRATED CURRENT RATED POWER 4.8A 4A3.2A2.65A 4.8A 4A3.2A2.65A4.8A 4A3.2A2.65A 96W 96W 96W 95.4W 96W 96W 96W 95.4W96W 96W 96W 95.4W 2.28A 2.28A2.28A 95.76W 95.76W95.76W 2A 2A2A 96W 96W96W 1.77A 1.77A1.77A 95.58W 95.58W95.58W RIPPLE & NOISE (max.)Note.2 150mVp-p RIPPLE & NOISE (max.)Note.2 150mVp-pRIPPLE & NOISE (max.)Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.6 17 ~ 22V VOLTAGE ADJ. RANGE Note.6 17 ~ 22VVOLTAGE ADJ. RANGE Note.6 17 ~ 22V 150mVp-p 150mVp-p150mVp-p 22 ~ 27V 22 ~ 27V22 ~ 27V 200mVp-p 200mVp-p200mVp-p 27 ~ 33V 27 ~ 33V27 ~ 33V 200mVp-p 200mVp-p200mVp-p 33 ~ 40V 33 ~ 40V33 ~ 40V 200mVp-p 200mVp-p200mVp-p 38 ~ 46V 38 ~ 46V38 ~ 46V 200mVp-p 200mVp-p200mVp-p 43 ~ 53V 43 ~ 53V43 ~ 53V 200mVp-p 200mVp-p200mVp-p 49 ~ 58V 49 ~ 58V49 ~ 58VOUTPUT OUTPUTOUTPUTCURRENT ADJ. RANGE CURRENT ADJ. RANGECURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type only Can be adjusted by internal potentiometer A type onlyCan be adjusted by internal potentiometer A type only 3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A 3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A3 ~ 4.8A2.5 ~ 4A2 ~ 3.2A1.65 ~ 2.65A1.4 ~ 2.28A 1.4 ~ 2.28A1.4 ~ 2.28A1.25 ~ 2A1.1 ~ 1.77A 1.25 ~ 2A1.1 ~ 1.77A1.25 ~ 2A1.1 ~ 1.77A VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0% VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0%VOLTAGE TOLERANCENote.3 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% 1.0% 1.0%1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5% 0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load SETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% loadSETUP, RISE TIMENote.81200ms,50ms/115VAC500ms,50ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC 16ms at full load 230VAC /115VAC16ms at full load 230VAC /115VAC VOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDC VOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDCVOLTAGE RANGENote.590 ~ 305VAC127 ~ 431VDCINPUT INPUTINPUT FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION FREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTIONFREQUENCY RANGE POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC input PF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC inputPF>0.98/115VAC,PF>0.95/230VAC,PF>0.93/277VACat full load (Please refer to "Power Factor Characteristic" curve) THD< 20% when output loading60% at 115VAC/230VACinput and output loading75% at 277VAC input EFFICIENCY (Typ.) EFFICIENCY (Typ.)EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.)AC CURRENT (Typ.) INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A MAX. No. of PSUs on 16AMAX. No. of PSUs on 16A 93% 93% 93% 93% 93% 93% 93% 93%93% 93% 93% 93% 1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC 1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC1.2A / 115VAC0.55A / 230VAC0.5A / 277VAC COLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VAC COLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VACCOLD START 60A(twidth=415smeasured at 50% Ipeak) at 230VAC 93% 93%93% 93% 93%93% 93% 93%93% CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VACCIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC LEAKAGE CURRENT OVER CURRENT LEAKAGE CURRENT OVER CURRENTLEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT SHORT CIRCUITSHORT CIRCUIT <0.75mA / 277VAC <0.75mA / 277VAC<0.75mA / 277VAC 95 ~ 106% 95 ~ 106%95 ~ 106% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removedConstant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTION 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 47 ~ 53V47 ~ 53V 54 ~ 63V 54 ~ 63V54 ~ 63V 59 ~ 65V 59 ~ 65V59 ~ 65V OVER VOLTAGE OVER VOLTAGEOVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITYOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITY ENVIRONMENTSTORAGE TEMP., HUMIDITYENVIRONMENTSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT TEMP. COEFFICIENTTEMP. COEFFICIENT VIBRATION VIBRATIONVIBRATION Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Protection type : Shut down o/p voltage with auto-recovery or re-power on to recoveryProtection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes downShut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70C (Refer to "Derating Curve") -40 ~ +70C (Refer to "Derating Curve")-40 ~ +70C (Refer to "Derating Curve") 20 ~ 95% RH non-condensing 20 ~ 95% RH non-condensing20 ~ 95% RH non-condensing -40 ~ +80C, 10 ~ 95% RH -40 ~ +80C, 10 ~ 95% RH-40 ~ +80C, 10 ~ 95% RH 0.03%/C (0 ~ 50C) 0.03%/C (0 ~ 50C)0.03%/C (0 ~ 50C) 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes 10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes10 ~ 500Hz, 5G 12min./1cycle, period for72min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ;SAFETY STANDARDS Note.7 UL8750(typeHL), CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 design refer to UL60950-1, TUV EN60950-1design refer to UL60950-1, TUV EN60950-1SAFETY & EMC SAFETY & EMCSAFETY & EMCOTHERS OTHERSOTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSIONWITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVACI/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C/ 70% RH Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2Class C (60% load) ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV),criteria A 192.2Khrs min.MIL-HDBK-217F(25C) 192.2Khrs min.MIL-HDBK-217F(25C)192.2Khrs min.MIL-HDBK-217F(25C) 220*68*38.8mm(L*W*H) 220*68*38.8mm(L*W*H)220*68*38.8mm(L*W*H) 1.12Kg; 12pcs/14.4Kg/0.74CUFT 1.12Kg; 12pcs/14.4Kg/0.74CUFT1.12Kg; 12pcs/14.4Kg/0.74CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature. 1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature.1. All parameters NOT specially mentioned aremeasured at 230VACinput,rated loadand 25C of ambient temperature. 2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor.2. Ripple & noise aremeasured at 20MHzof bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf& 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and loadregulation. 3. Tolerance : includes set up tolerance, line regulation and loadregulation.3. Tolerance : includes set up tolerance, line regulation and loadregulation. 4. Please referto "DRIVING METHODS OF LED MODULE". 4. Please referto "DRIVING METHODS OF LED MODULE".4. Please referto "DRIVING METHODS OF LED MODULE". 5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details. 5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details.5. Derating maybeneeded under low inputvoltages. Please check thestatic characteristics for more details. 6. A typeonly. 6. A typeonly.6. A typeonly. 7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18. 7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18.7. Safety and EMC design referto EN60598-1, CNS15233, GB7000.1, FCCpart18. 8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time. 8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time.8. Length of set up timeis measured at cold first start. Turning ON/OFF thepower supply maylead to increase of theset up time. 9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again.9. Thepower supply is considered as a component thatwill beoperated in combination with final equipment. Since EMC performance will beaffected by the complete installation, thefinal equipment manufacturers must re-qualify EMC Directive on thecomplete installation again. 10.Refer to warranty statement. 10.Refer to warranty statement.10.Refer to warranty statement. 11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains. 11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains.11.To fulfill requirements of thelatest ErPregulation for lightingfixtures, this LED power supply can only beused behind a switch withoutpermanently connected to themains. File Name:HLG-100H-SPEC 2015-07-23 File Name:HLG-100H-SPEC 2015-07-23File Name:HLG-100H-SPEC 2015-07-23