


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| وزن | Net weight: 50 g approx., Gross weight: 115 g approx. |
| تفصیلات | Resin body type |
| ڈسپلے | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| پروڈکٹ | Integrated Display Type Digital Flow Sensor |
| مواد | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| لکیریت | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| پورٹ سائز | ø4 ø0.157 push-in |
| تحفظ | IP40 (IEC) |
| لوازمات | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| پارٹ نمبر | FM-253-4-P |
| کیبل کی لمبائی | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| پروڈکٹ کا نام | Integrated Display Type Digital Flow Sensor FM-200 |
| تکراری قابلیت | Within ±1 % F.S. |
| بیرونی ان پٹ | ON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more |
| پروڈکٹ نمبر | FM-253-4-P |
| سپلائی وولٹیج | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| محیطی نمی | 35 to 90 % RH, Storage: 35 to 90 % RH |
| قابل اطلاق سیال | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| جھٹکا مزاحمت | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| جڑنے کا طریقہ | Connector |
| تقابلی پیداوار | PNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current) |
| انکلوژر ارتھنگ | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| محیطی درجہ حرارت | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| موجودہ کھپت | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| مکمل پیمانے پر بہاؤ کی شرح | 5 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| شرح شدہ دباؤ کی حد | -0.09 to +0.7 MPa |
| کمپن مزاحمت | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| ینالاگ وولٹیج آؤٹ پٹ | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| موصلیت مزاحمت | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| درستگی کی یقین دہانی کی حد | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| دباؤ کی خصوصیات | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| وولٹیج برداشت کرنے کی صلاحیت | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| دباؤ برداشت کرنے کی صلاحیت | 1 MPa |
| متعین مربوط قدر | 0.05 ℓ |
| درجہ حرارت کی خصوصیات | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| تقابلی پیداوار: Hysteresis | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| CE نشان زد ہدایت کی تعمیل | EMC Directive, RoHS Directive |
| تقابلی آؤٹ پٹ: آؤٹ پٹ موڈز | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| فوری بہاؤ کی شرح: ڈسپلے کی حد | -5.5 to +5.5 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| تقابلی پیداوار: رسپانس ٹائم | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| مربوط بہاؤ کی شرح: ڈسپلے کی حد | ±99999.99 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| تقابلی پیداوار: شارٹ سرکٹ تحفظ | Incorporated |
| فوری بہاؤ کی شرح: ترتیب اور ڈسپلے ریزولوشن | 0.01 ℓ/min. |
| مربوط بہاؤ کی شرح: ترتیب اور ڈسپلے ریزولوشن | 0.01 ℓ |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ