

| پیرامیٹر | قیمت |
|---|---|
| 7 Nm (Support: EN 62444) | |
| رنگ | Brass color |
| ڈھال | yes |
| درخواست | EMC |
| ہالوجن سے پاک | no |
| کارخانہ دار | BIMED |
| مصنوعات کی قسم | Cable screw gland |
| تھریڈ پچ | 1.5 mm |
| اسمبلی نوٹ | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| سوراخ کا قطر | 16.1 mm ... 16.2 mm |
| آرٹیکل پر نظر ثانی | 00 |
| ٹارک کو سخت کرنا | 7 Nm (Union nut) |
| جہتی ڈرائنگ | |
| تحفظ کی ڈگری | IP68 (5 bar, 30 minutes) |
| مہر مواد O- انگوٹی | Perbunan |
| رنچ سائز، حمایت | 20 mm |
| ڈیزائن، کشیدگی ریلیف | A |
| رینچ سائز، یونین نٹ | 20 mm |
| انکلوژر ریٹنگ (NEMA) | 4X |
| بیرونی کیبل قطر | 5 mm ... 10 mm |
| صدمے کے اثرات کا زمرہ | 6 |
| صنعت کار کا عہدہ | BMEM-E1 |
| سیل مواد کیبل مہر | CR |
| مسدس کونیی طول و عرض | 22 mm |
| مواد کمپریشن کی انگوٹی | PA 6 |
| دھاگے کی قسم کنکشن سائیڈ | M16 x 1.5 |
| سکرو کنکشن کے لئے مواد | Brass, nickel-plated |
| تناؤ سے نجات کا عمل | A |
| محیطی درجہ حرارت (آپریشن) | -40 °C ... 100 °C (static) |
| جڑنے والے دھاگے کی لمبائی | 7 mm |
| کیبل میان کے بغیر کیبل قطر | 4 mm (Diameter of braided shield) |
| سٹرین ریلیف کلپ کی کلیمپنگ رینج | 6.00 mm ... 10.00 mm (for UL 514 B) |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ