GS40A48-P1J

4 0 W a C D C a S i n g l e O u t p u t to D e s k t o pG S 4 0 s e r i e s 4 0 W a C D C a S i n g l e O u t p u t to D e s k t o pG S 4 0 s e r i e s4 0 W a C D C a S i n g l e O u t p u t to D e s k t o pG S 4 0 s e r i e sFeatures : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range 3 pole AC inlet IEC320-C14 3 pole AC inlet IEC320-C143 pole AC inlet IEC320-C14 Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltageProtections: short circuit / Overload / Over voltage Fully enclosed plastic case Fully enclosed plastic caseFully enclosed plastic case Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Classpower ( with earthpin) Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Classpower ( with earthpin)Approvals: UL / CUL / TUV / BSMI / CB / FCC / CE Classpower ( with earthpin) Pass LPS Pass LPSPass LPS LED indicator for power on LED indicator for power onLED indicator for power on Not loadpowerconsumptione0.3w Not loadpowerconsumptione0.3wNot loadpowerconsumptione0.3w Meet EISA 2007(Energy IndependenceandSecurity Law) Meet EISA 2007(Energy IndependenceandSecurity Law)Meet EISA 2007(Energy IndependenceandSecurity Law) 2 yearswarranty 2 yearswarranty2 yearswarrantySPECIFICATION SPECIFICATIONSPECIFICATION (except for 48V) (except for 48V)(except for 48V) T U V T U VT U V R h e i n l a n d R h e i n l a n dR h e i n l a n d Pr o d u c t S a f e t y Pr o d u c t S a f e t yPr o d u c t S a f e t y geprUfre geprUfregeprUfre Sicherheit SicherheitSicherheit ORDER NO. ORDER NO.ORDER NO. GS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1J GS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1JGS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1J SECURITY MODEL NO. SECURITY MODEL NO.SECURITY MODEL NO. GS40A05 GS40A05GS40A05 GS40A07 GS40A07GS40A07 GS40A09 GS40A09GS40A09 GS40A12 GS40A12GS40A12 GS40A15 GS40A15GS40A15 GS40A18 GS40A18GS40A18 GS40A24 GS40A24GS40A24 GS40A48 GS40A48GS40A48 DC VOLTAGENote.25V DC VOLTAGENote.25VDC VOLTAGENote.25V 7.5 V, 9V 7.5 V, 9V7.5 V, 9V 12V 12V12V 15V 15V15V 18V 18V18V 24V 24V24V 48V 48V48V RATED CURRENT RATED CURRENTRATED CURRENT 5A5.34A 4.45 A 3.34 A 2.67 A 2.22 A 1.67 A 0.84 A 5A5.34A 4.45 A 3.34 A 2.67 A 2.22 A 1.67 A 0.84 A5A5.34A 4.45 A 3.34 A 2.67 A 2.22 A 1.67 A 0.84 A CURRENT RANGE CURRENT RANGECURRENT RANGE 0 - 5A0 - 5.34A0 - 4.45 A 0 - 5A0 - 5.34A0 - 4.45 A0 - 5A0 - 5.34A0 - 4.45 A 0 - 3.34 A 0 - 3.34 A0 - 3.34 A 0 - 2.67A0 - 2.22A0 - 1.67A0 - 0.84 A 0 - 2.67A0 - 2.22A0 - 1.67A0 - 0.84 A0 - 2.67A0 - 2.22A0 - 1.67A0 - 0.84 A RATED POWER (max.) RATED POWER (max.)RATED POWER (max.) 25W 40W 40W 40W 25W 40W 40W 40W25W 40W 40W 40W 40W 40W 40W 40W 40W 40W 40W 40W40W 40W 40W 40W OUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.3 100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p150mVp-p180mVp-p240mVp-p VOLTAGE TOLERANCE Note.45.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% LINE REGULATIONNote.51.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION5.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% SETUP, RISE TIME Note.71000ms, 30ms / 230VAC 1000ms, 30ms / 115VACat full load RIPPLE & NOISE (max.) Note.3 100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p150mVp-p180mVp-p240mVp-p VOLTAGE TOLERANCE Note.45.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% LINE REGULATIONNote.51.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION5.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% SETUP, RISE TIME Note.71000ms, 30ms / 230VAC 1000ms, 30ms / 115VACat full loadRIPPLE & NOISE (max.) Note.3 100mVp-p100mVp-p100mVp-p100mVp-p100mVp-p150mVp-p180mVp-p240mVp-p VOLTAGE TOLERANCE Note.45.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% LINE REGULATIONNote.51.0%1.0%1.0%1.0%1.0%1.0%1.0%1.0% LOAD REGULATION5.0%5.0%5.0%3.0%3.0%3.0%2.5%2.5% SETUP, RISE TIME Note.71000ms, 30ms / 230VAC 1000ms, 30ms / 115VACat full load HOLD TIME (Typ.) VOLTAGE RANGE HOLD TIME (Typ.) VOLTAGE RANGEHOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGEFREQUENCY RANGE 50ms / 230VAC15ms / 115VACat full load 50ms / 230VAC15ms / 115VACat full load50ms / 230VAC15ms / 115VACat full load 90 - 264VAC 127 - 370VDC 90 - 264VAC 127 - 370VDC90 - 264VAC 127 - 370VDC 47 - 63Hz 47 - 63Hz47 - 63HzINPUT INPUTINPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.) EFFICIENCY (Typ.) AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)EFFICIENCY (Typ.) AC CURRENT (Typ.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD ofThe OVERHEAD of 80.5% 85.5% 80.5% 85.5%80.5% 85.5% 1A / 115VAC0.5A / 230VAC 1A / 115VAC0.5A / 230VAC1A / 115VAC0.5A / 230VAC 65A / 230VAC 65A / 230VAC65A / 230VAC 0.75 mA / 240VAC 0.75 mA / 240VAC0.75 mA / 240VAC 105 - 150% rated output power 105 - 150% rated output power105 - 150% rated output power 85% 85%85% 89% 89%89% 89.5% 89.5%89.5% 90% 90%90% 91% 91%91% 92% 92%92% PROTECTION PROTECTIONPROTECTION Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE OVER VOLTAGEOVER VOLTAGE 5.25 - 6.75 V 5.25 - 6.75 V5.25 - 6.75 V 7.88 - 10.13 V 7.88 - 10.13 V7.88 - 10.13 V 9.45 - 12.15 V 9.45 - 12.15 V9.45 - 12.15 V 12.6 16.2 V 12.6 16.2 V12.6 16.2 V 15.75 - 20.25 V 15.75 - 20.25 V15.75 - 20.25 V 18.9 - 24.3 V 18.9 - 24.3 V18.9 - 24.3 V 25.2 - 32.4 V 25.2 - 32.4 V25.2 - 32.4 V 50.4 - 64.8 V 50.4 - 64.8 V50.4 - 64.8 VENVIRONMENT ENVIRONMENTENVIRONMENTWORKING TEMP. WORKING HUMIDITY WORKING TEMP. WORKING HUMIDITYWORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURESTORAGE TEMP., The MOISTURE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover -30 - +60(Refer to "Reduction Curve") -30 - +60(Refer to "Reduction Curve")-30 - +60(Refer to "Reduction Curve") 20% - 90% RH non-condensing 20% - 90% RH non-condensing20% - 90% RH non-condensing -40 - +85 , 10% - 95% RH -40 - +85 , 10% - 95% RH-40 - +85 , 10% - 95% RH TEMP. COEFFICIENT 0.03% / (0-50) TEMP. COEFFICIENT 0.03% / (0-50)TEMP. COEFFICIENT 0.03% / (0-50)SAFETY AND EMC SAFETY AND EMCSAFETY AND EMC (Note. 6) (Note. 6)(Note. 6)OTHER CONNECTOR OTHER CONNECTOROTHER CONNECTOR The VIBRATION The VIBRATIONThe VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING EMC IMMUNITY MTBF DIMENSION PACKINGEMC IMMUNITY MTBF DIMENSION PACKING PLUG PLUGPLUG CABLE CABLECABLE 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, J60950-1(except for 48V) approved UL60950-1, TUV EN60950-1, BSMI CNS14336, J60950-1(except for 48V) approvedUL60950-1, TUV EN60950-1, BSMI CNS14336, J60950-1(except for 48V) approved I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVACI/P-O/P:3KVAC I/P-FG:1.5 KVAC O/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class B, EN61000-3-2,3,FCC PART 15 / CISPR22 class B, CNS13438 class B, GB17625.1 Compliance to EN55022 class B, EN61000-3-2,3,FCC PART 15 / CISPR22 class B, CNS13438 class B, GB17625.1Compliance to EN55022 class B, EN61000-3-2,3,FCC PART 15 / CISPR22 class B, CNS13438 class B, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 711Khrs min.MIL-HDBK-217F(25) 711Khrs min.MIL-HDBK-217F(25)711Khrs min.MIL-HDBK-217F(25) 125*50*31.5 mm (L*W*H) 125*50*31.5 mm (L*W*H)125*50*31.5 mm (L*W*H) 0.28 Kg; 40pcs/12.02 Kg/1.05 CUFT 0.28 Kg; 40pcs/12.02 Kg/1.05 CUFT0.28 Kg; 40pcs/12.02 Kg/1.05 CUFT Standard type P1J: 2.1 * 5.5 * 11 mm, tuning fork type, center of positivefor stock ; Other type available by customer requested Standard type P1J: 2.1 * 5.5 * 11 mm, tuning fork type, center of positivefor stock ; Other type available by customer requestedStandard type P1J: 2.1 * 5.5 * 11 mm, tuning fork type, center of positivefor stock ; Other type available by customer requested See page 2 ; Other type available by customer requested See page 2 ; Other type available by customer requestedSee page 2 ; Other type available by customer requestedNOTE NOTENOTE 1. All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment. 1. All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment.1. All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment. 2. DC voltage: The outputvoltage setat point measure by plug terminal & 50% load. 2. DC voltage: The outputvoltage setat point measure by plug terminal & 50% load.2. DC voltage: The outputvoltage setat point measure by plug terminal & 50% load. 3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.3. Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 4. Tolerance: includes set up tolerance, line regulation, load regulation.4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 5. Line regulation is measured from low line to high line at rated load.5. Line regulation is measured from low line to high line at rated load. 6. The supply is considered as a separate unit, but the final equipment still need to re-confirm that the system complies with the 6. The supply is considered as a separate unit, but the final equipment still need to re-confirm that the system complies with the6. The supply is considered as a separate unit, but the final equipment still need to re-confirm that the system complies with the EMC directives. EMC directives.EMC directives. 7. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may leadto increase in the start-up time. 7. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may leadto increase in the start-up time.7. Lengthof set up time is measured at first cold start. Turn on/OFF the supply may leadto increase in the start-up time.File name:GS40-SPEC 2011-06-15 File name:GS40-SPEC 2011-06-15File name:GS40-SPEC 2011-06-15