اسٹاک میں ہاٹ پروڈکٹ
HC-M-02-MOD-BU
HC-M-02-MOD-BU 1679359 PHOENIX CONTACT HEAVYCON contact insert module, female, 2-pos., axial screw connection
$0.00امریکی ڈالر
4412 اسٹاک میں
اہم وضاحتیں
:Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
چوڑائی:34.2 mm
اونچائی:40.6 mm
لمبائی:14.6 mm
سپلائر کی معلومات
پروڈکٹس: 0
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت
تکنیکی تفصیلات
| پیرامیٹر | قیمت |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| چوڑائی | 34.2 mm |
| اونچائی | 40.6 mm |
| لمبائی | 14.6 mm |
| سلسلہ | HC-M-02 |
| جنرل | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| درخواست | Power |
| مصنوعات کی قسم | Modular contact insert |
| اسمبلی نوٹ | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| شرح شدہ کرنٹ | 40 A |
| رابطہ مواد | Copper alloy |
| ہیکساگونل ساکٹ | SW 2 |
| رابطہ نمبر | 1 - 2 |
| ٹارک کو سخت کرنا | 1.5 Nm (2.5 mm² ... 4 mm²) |
| کنکشن پروفائل | 2 |
| آلودگی کی ڈگری | 3 |
| جہتی ڈرائنگ | |
| عہدوں کی تعداد | 2 |
| شرح شدہ سرج وولٹیج | 8 kV |
| اوور وولٹیج کیٹیگری | III |
| کنکشن ٹیکنالوجی | Axial screw connection |
| شرح شدہ وولٹیج (III/3) | 1000 V |
| ماڈیول سلاٹس کی تعداد | 1 |
| کنڈکٹر کراس سیکشن | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| کیریئر مواد سے رابطہ کریں۔ | PC |
| رابطہ سطح مواد | Ag |
| اندراج/نکالنے کے چکر | ≥ 500 |
| کنکشن کراس سیکشن AWG | 12 ... 10 |
| محیطی درجہ حرارت (آپریشن) | -40 °C ... 125 °C |
| اے سی سی میں کنکشن معیاری کے ساتھ | IEC / EN |
| UL 94 کے مطابق آتش گیر درجہ بندی | V0 |
| انفرادی تار کی سٹرپنگ لمبائی | 8 mm +1 mm (for 6 mm²) |
پروڈکٹ کی وضاحت
More details
اہم خصوصیات
- صنعتی معیار
- RoHS کے مطابق
- سی ای سرٹیفائیڈ
- 1 سال کی وارنٹی
پروڈکٹ دستاویزات
ڈیٹا شیٹ
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
یوزر مینول
انسٹالیشن اور آپریشن گائیڈ
