HSP-300-4.2

300W Single Output with PFC Function 300W Single Output with PFC Function300W Single Output with PFC Function HSP-300series HSP-300seriesHSP-300seriesFeatures : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 secondsWithstand 300VAC surge input for 5 seconds Built-in active PFC function Built-in active PFC functionBuilt-in active PFC function Low leakage current#1mA Low leakage current#1mALow leakage current#1mA Protections: Short circuit / Overload / Over voltage/ Over temperature Protections: Short circuit / Overload / Over voltage/ Over temperatureProtections: Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convectionCooling by free air convection Low profile:31mm Low profile:31mmLow profile:31mm Conformalcoated ConformalcoatedConformalcoated LED indicator for power on LED indicator for power onLED indicator for power on Suitable for high efficiency moving sign applications Suitable for high efficiency moving sign applicationsSuitable for high efficiency moving sign applications 3 years warranty 3 years warranty3 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION Bauar t gepr u f t Bauar t gepr u f tBauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma geSicherheit egel ma ge od o s od o sod o s be wacg be wacgbe wacg www. tuv. com www. tuv. comwww. tuv. com ID 2000000000 ID 2000000000ID 2000000000 MODEL MODELMODEL HSP-300-2.8HSP-300-4.2 HSP-300-2.8HSP-300-4.2HSP-300-2.8HSP-300-4.2 HSP-300-5 HSP-300-5HSP-300-5 DC VOLTAGE RATED CURRENT DC VOLTAGE RATED CURRENTDC VOLTAGE RATED CURRENT 2.8V 2.8V2.8V 60A 60A60A 4.2V 4.2V4.2V 60A 60A60A 5V 5V5V 60A 60A60A CURRENT RANGE Note.5 CURRENT RANGE Note.5CURRENT RANGE Note.5 RATED POWER(convection) RATED POWER(convection)RATED POWER(convection) 0 ~ 60A0 ~ 60A 0 ~ 60A0 ~ 60A0 ~ 60A0 ~ 60A 168W 252W 168W 252W168W 252W 0 ~ 60A 0 ~ 60A0 ~ 60A 300W 300W300W OUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-p RIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-pRIPPLE & NOISE (max.) Note.2110mVp-p 150mVp-p 150mVp-p 150mVp-p150mVp-p VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LINE REGULATIONLINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.)LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) 2.5~3V3.6~4.4V 2.5~3V3.6~4.4V2.5~3V3.6~4.4V 2.0%2.0% 2.0%2.0%2.0%2.0% 0.5%0.5% 0.5%0.5%0.5%0.5% 1.0%1.0% 1.0%1.0%1.0%1.0% 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load 8ms/230VAC8ms/115VAC at full load 8ms/230VAC8ms/115VAC at full load8ms/230VAC8ms/115VAC at full load 4.5~5.5V 4.5~5.5V4.5~5.5V 2.0% 2.0%2.0% 0.5% 0.5%0.5% 1.0% 1.0%1.0% VOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDC VOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDCVOLTAGE RANGE Note.4 180 ~ 264VAC254 ~ 370VDC or 90~135VAC 127~190VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF0.93/230VACPF 0.98/115VAC at full load PF0.93/230VACPF 0.98/115VAC at full loadPF0.93/230VACPF 0.98/115VAC at full load INPUT INPUTINPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENTEFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT 80% 80%80% 2.8A/115VAC 1.4A/230VAC 2.8A/115VAC 1.4A/230VAC2.8A/115VAC 1.4A/230VAC Cold start30A/115VAC60A/230VAC Cold start30A/115VAC60A/230VACCold start30A/115VAC60A/230VAC <1mA / 240VAC <1mA / 240VAC<1mA / 240VAC 105~150% rated output power 105~150% rated output power105~150% rated output power 85% 85%85% 3.9A/115VAC 1.95A/230VAC 3.9A/115VAC 1.95A/230VAC3.9A/115VAC 1.95A/230VAC 87% 87%87% 4.7A/115VAC 2.35A/230VAC 4.7A/115VAC 2.35A/230VAC4.7A/115VAC 2.35A/230VAC OVERLOAD OVERLOADOVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removedPROTECTION PROTECTIONPROTECTION SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removedSHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.22 ~ 3.78V 4.6 ~ 5.4V 3.22 ~ 3.78V 4.6 ~ 5.4V3.22 ~ 3.78V 4.6 ~ 5.4V5.7 ~ 7.0V 5.7 ~ 7.0V5.7 ~ 7.0VENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY & EMC SAFETY & EMCSAFETY & EMC (Note 5) (Note 5)(Note 5) OTHERS OTHERSOTHERS OVER VOLTAGE OVER VOLTAGEOVER VOLTAGEOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITYOVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY STORAGE TEMP., HUMIDITYSTORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDSSAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSIONWITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after fault condition is removed Shut down o/p voltage, recovers automatically after fault condition is removedShut down o/p voltage, recovers automatically after fault condition is removed -30 ~ +70(Refer to "Derating Curve") -30 ~ +70(Refer to "Derating Curve")-30 ~ +70(Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH -40 ~ +85, 10 ~ 95% RH-40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 60) 0.03%/ (0 ~ 60)0.03%/ (0 ~ 60) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1,EN60950-1,CCC GB4943 approved UL60950-1,EN60950-1,CCC GB4943 approvedUL60950-1,EN60950-1,CCC GB4943 approved I/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVACI/P-O/P:3.0KVAC I/P-FG:2.0KVACO/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25/ 70%RH Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1 Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1Compliance to EN55022 (CISPR22),GB9254,Class B, EN61000-3-2,-3,GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A Compliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria ACompliance to EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level (surge 4KV),criteria A 263.2K hrs min.MIL-HDBK-217F (25) 263.2K hrs min.MIL-HDBK-217F (25)263.2K hrs min.MIL-HDBK-217F (25) 210*81*31mm (L*W*H) 210*81*31mm (L*W*H)210*81*31mm (L*W*H) 0.8kg; 15pcs/ 12.1kg/ 0.7CUFT 0.8kg; 15pcs/ 12.1kg/ 0.7CUFT0.8kg; 15pcs/ 12.1kg/ 0.7CUFT NOTE NOTENOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and loadregulation. 3. Tolerance : includes set up tolerance, line regulation and loadregulation.3. Tolerance : includes set up tolerance, line regulation and loadregulation. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details.4. Deratingmay be needed underlow input voltages. Please checkthe static characteristics for more details. 5. Please refer to "Static Characteristics". 5. Please refer to "Static Characteristics".5. Please refer to "Static Characteristics". 6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com) 6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)6. The powersupply is considered a component which will be installedinto a final equipment. All the EMC tests are been executed by mountingthe unit on a 450mm*450mm metalplate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (as available on http://www.meanwell.com)File Name:HSP-300-SPEC2016-01-21 File Name:HSP-300-SPEC2016-01-21File Name:HSP-300-SPEC2016-01-21