


| پیرامیٹر | قیمت |
|---|---|
| نام (تفصیلات) | IDLC-45A-500 |
| ریاست (تفصیلات) | New |
| فارمیٹ (تفصیلات) | Box |
| سیریز (تفصیلات) | IDLC-45A |
| منظوری (تفصیلات) | CCC, CE, ENEC, UL |
| پاور (W) (تفصیلات) | 45,00 |
| ضابطہ (تفصیلات) | 0-10V, 1-10V, PWM Signal 10V |
| ذیلی فارمیٹو (تفصیلات) | IP20 |
| چوڑائی (ملی میٹر) (تفصیلات) | 75.00 |
| اونچائی (ملی میٹر) (تفصیلات) | 25.00 |
| AC ان پٹ میکس (تفصیلات) | 295,00 |
| AC ان پٹ منٹ (تفصیلات) | 90,00 |
| درخواستیں (تفصیلات) | Lighting |
| مینوفیکچرر (تفصیلات) | MEAN WELL |
| مصنوعات کی قسم (تفصیلات) | LED Driver |
| تنہائی (V) (تفصیلات) | 3.750,00 |
| چوٹی کی طاقت (W) (تفصیلات) | Forty five |
| ان پٹ کنیکٹر (تفصیلات) | Quick Connector |
| ان پٹ فریکوئنسی (تفصیلات) | 50 Hz, 60 Hz |
| طویل/پس منظر (تفصیلات) | 120.00 |
| لمبی تفصیل (تفصیلات) | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-295Vca47-63Hz.Output in constant current500mA.Range of output voltage with current mode constant54 to 90Vccaccording to the number d eLEDs in series.Power:45W.Efficiency typical:85%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <1,2 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):120 x 75 x 25mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With plastic housing designed for lighting applications in interior.Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| آؤٹ پٹ کنیکٹر (تفصیلات) | Quick Connector |
| داخلے کی قسم CA (تفصیلات) | Single-phase |
| وارنٹی (سال) (تفصیلات) | 3,00 |
| اصل ملک (تفصیلات) | China |
| آؤٹ پٹ کرنٹ ایم اے (تفصیلات) | Five hundred |
| کم از کم آؤٹ پٹ کی شدت (ایم اے) (تفصیلات) | 500,00 |
| آؤٹ پٹ کی زیادہ سے زیادہ شدت (ایم اے) (تفصیلات) | 500,00 |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ