سروس کا وقت: پیر سے جمعہ صبح 9:00 سے شام 6:00 تک
LS-501 - LS-501 PANASONIC Laser Amplifier (with display), connector type, 2 outputs NPN
اسٹاک میں ہاٹ پروڈکٹ

LS-501

LS-501 PANASONIC Laser Amplifier (with display), connector type, 2 outputs NPN

$0.00امریکی ڈالر
4022 اسٹاک میں
اہم وضاحتیں
آئٹم:Specifications
کیبل:-
وزن:Net weight: 15 g approx.Gross weight: 55 g approx.
تفصیلات:Amplifiers(Connector type)
سپلائر کی معلومات
PANASONIC
PANASONIC
پروڈکٹس: 4316
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت

تکنیکی تفصیلات

پیرامیٹرقیمت
آئٹمSpecifications
کیبل-
وزنNet weight: 15 g approx.Gross weight: 55 g approx.
تفصیلاتAmplifiers(Connector type)
پروڈکٹAmplifier-separated Type Digital Laser Sensor
موادEnclosure: PolycarbonateCover: PolycarbonateSwitch: Polyacetal
لوازماتFX-MB1 (Amplifier protective seal): 1 set
تحفظIP40(IEC)
پارٹ نمبرLS-501
پروڈکٹ کا نامAmplifier-separated Type Digital Laser Sensor LS-500
جوابی وقتH-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable
بیرونی ان پٹNPN non-contact input- Signal condition High: +8 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)- Input impedance: 10 kOhm approx.(Note:Select either sensing output 2 or external input.)
پروڈکٹ نمبرLS-501
سپلائی وولٹیج12 to 24 V DC +10-15% Ripple P-P 10 % or less
ٹائمر فنکشنOFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,switchable either effective of ineffective, with variable timer periodOFF-delay timer, ON-delay timer, ONE-SHOT timer,switchable either effective of ineffective, with variable timer period
کیبل کی توسیعExtension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable.
ڈیجیٹل ڈسپلے8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO
محیطی نمی35 to 85 % RH, Storage: 35 to 85 % RH
جھٹکا مزاحمت98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
منطقی آپریشنBetween sensing output 1 and calculation target: Disabled / and / or / xor, selectableCalculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable
بجلی کی کھپتNormal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage)ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
محیطی درجہ حرارت-10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 16 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
آپریشن کے اشارےOrange LED (lights up when sensing output 1 or sensing output 2 is ON)
حساسیت کی ترتیب2-level teaching / limit teaching / full auto teaching / manual adjustment
ٹائمر فنکشن: ٹائمTimer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervalsTimer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervalsTimer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output.
کمپن مزاحمت10 to 150 Hz frequency, 0.75 mm 0.030 in (max. 10 G) amplitude in X, Y and Z directions for two hours each
موصلیت مزاحمت20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
موجودہ آؤٹ پٹ کی نگرانی کریں۔-
بیرونی ان پٹ فنکشنLaser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable
آؤٹ پٹ سلیکٹ اشارےYellow LED (lights up when output is selected)
لیزر اخراج اشارےGreen LED (lights up during laser emission)
وولٹیج برداشت کرنے کی صلاحیت1,000 V AC for one min. between all supply terminals connected together and enclosure
CE نشان زد ہدایت کی تعمیلEMC Directive, RoHS Directive
واقعہ روشنی اشارے کی حدH-SP/FAST/STD: 0 to 4,000LONG/U-LG/HYPR: 0 to 9,999
سینسنگ آؤٹ پٹ (سینسنگ آؤٹ پٹ 1، 2)NPN open-collector transistor・Maximum sink current: 50 mA (Note:25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at max. sink current)(Note:Select either sensing output 2 or external input as the connector type.)
سینسنگ آؤٹ پٹ سیٹنگ: سینسنگ آؤٹ پٹ 1Normal mode, differential mode, hysteresis mode, window comparator mode, selectable
سینسنگ آؤٹ پٹ سیٹنگ: سینسنگ آؤٹ پٹ 2Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, selectable(Note:Select either sensing output 2 or external input.)
خودکار مداخلت کی روک تھام کی تقریبIncorporated(Note:Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR)
سینسنگ آؤٹ پٹ (سینسنگ آؤٹ پٹ 1، 2): آؤٹ پٹ آپریشنSelectable either Light-ON or Dark-ON
سینسنگ آؤٹ پٹ (سینسنگ آؤٹ پٹ 1، 2): شارٹ سرکٹ پروٹیکشنIncorporated

پروڈکٹ کی وضاحت

More details
اہم خصوصیات
  • صنعتی معیار
  • RoHS کے مطابق
  • سی ای سرٹیفائیڈ
  • 1 سال کی وارنٹی

پروڈکٹ دستاویزات

ڈیٹا شیٹ

تکنیکی تفصیلات اور کارکردگی کے ڈیٹا

یوزر مینول

انسٹالیشن اور آپریشن گائیڈ

Top