


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| پی ایف ایچ ڈی | 2.9 × 10-9(Note) Probability of dangerous failure per hour. |
| کیبل | 0.15 mm2(power line: 0.2 mm2) 8-core heat-resistant PVC cable, 5 m16.404 ftlong |
| ایم ٹی ٹی ایف ڈی | 100 years or more(Note) Mean time to dangerous failure. |
| تفصیلات | Min. sensing object ø45 mmø1.772 in(40 mm1.575 inbeam pitch) |
| پروڈکٹ | Compact Safety Light Curtain[Type4 PLe SIL3] |
| مواد | Enclosure: Polycarbonate |
| بیم پچ | 40 mm1.575 in |
| لوازمات | - |
| پارٹ نمبر | SF4B-A28C |
| پروڈکٹ کا نام | Compact Safety Light Curtain[Type4 PLe SIL3] SF4B-C |
| ELCA فنکشن | Incorporated (reducing mutual interference automatically) |
| پاور وولٹیج | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| جوابی وقت | OFF response: 14 ms or lessON response: 80 to 90 ms |
| پروڈکٹ نمبر | SF4B-A28C |
| کیبل کی توسیع | Extension up to total 50 m164.042 ftis possible for 0.2 mm2or more, cable(Note) When the synchronization+ wire (orange) and synchronization- wire (orange / black) is extended with a cable other than exclusive cable, use a 0.2 mm2or more shielded twisted pair cable. |
| فنکشن کو خاموش کرنا | - |
| آپریٹنگ رینج | 0.3 to 7m0.984 to 22.966 ft(Note) The operating range is the possible setting distance between the emitter and the receiver. |
| محیطی نمی | 30 to 85 % RH, Storage: 30 to 85 % RH |
| خارج کرنے والا عنصر | Infrared LED (Peak emission wavelength: 850 nm0.033 mil) |
| آلودگی کی ڈگری | 3 |
| جھٹکا مزاحمت | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions for three times each |
| اوور رائڈ فنکشن | - |
| حفاظتی اونچائی | 1,143.4 mm45.016 in |
| انٹرلاک فنکشن | Incorporated [Manual reset / Auto reset](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status. |
| آپریٹنگ اونچائی | 2,000 m6,561.68 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| اختیاری افعال | Fixed blanking, floating blanking, light emitting amount control, auxiliary output switching, protecting, interlock setting changing, external relay monitor setting changing(Note) In case of using optional function, the handy-controller SFB-HC is required. |
| محیطی روشنی | Incandescent light: 3,500 liter x or less at the light-receiving face |
| محیطی درجہ حرارت | -10 to +55℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: –25 to +60 ℃–3 to +140 ℉ |
| موجودہ کھپت | Emitter: 70 mA or lessReceiver: 85 mA or less |
| کم از کم سینسنگ آبجیکٹ | ø 45 mmø 1.772 inopaque object(Note) In case the blanking function is valid, the operation mode is changed. |
| بیم چینلز کی تعداد | 28 |
| کمپن مزاحمت | 10 to 55 Hz frequency, 0.75 mm0.030 inamplitude in X, Y and Z directions for two hours each |
| موصلیت مزاحمت | 20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| اخراج کو روکنے کا فنکشن | Incorporated |
| معاون آؤٹ پٹ کو خاموش کرنا | - |
| مؤثر یپرچر زاویہ | plus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| قابل اطلاق معیارات: جاپان | JIS B 9704-1 / 2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508 (SIL3) |
| CE نشان زد ہدایت کی تعمیل | Machine Directive, EMC Directive, RoHS Directive |
| قابل اطلاق معیارات: یورپ (EU) | EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| کنٹرول آؤٹ پٹس (OSSD 1، OSSD 2) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 200 mA• Applied voltage: Same as supply voltage (between the control output and +V)• Residual voltage: 2.5 V or less (source current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less• Maximum sink current: 200 mA• Applied voltage: Same as supply voltage (between the control output and 0 V)• Residual voltage: 2.5 V or less (sink current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: : 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less |
| قابل اطلاق معیارات: شمالی امریکہ | ANSI / UL 61496-1 / 2 (Type 4), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 4), CAN / CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI / RIA 15.06(Note) The product has been safety-certified in accordance with UL, ANSI, CSA, and other standards by TÜV SÜD America, a nationally recognizedsafety laboratory (NRTL) that has been approved by the Occupational Safety and Health Administration (OSHA) as defined by 29 CFR 1910.7 |
| بیرونی آلہ کی نگرانی کی تقریب | Incorporated |
| معاون پیداوار (غیر حفاظتی پیداوار) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and +V)• Residual voltage: 2.5 V or less (source current 60 mA, when using 20 m65.617 ftlength cable)• Maximum sink current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 60 mA, when using 20 m65.617 ftlength cable) |
| بڑے کثیر مقصدی اشارے کی تقریب | - |
| معاون آؤٹ پٹ کو خاموش کرنا: آپریشن موڈ | - |
| قابل اطلاق معیارات: جنوبی کوریا (S-Mark) | S1-G-35-2005, s2-W-11-2003 |
| معاون آؤٹ پٹ کو خاموش کرنا: پروٹیکشن سرکٹ | - |
| خالص وزن (ایمیٹر اور وصول کنندہ کا کل) | approx. 1,600 g |
| قابل اطلاق معیار: بین الاقوامی معیار | IEC 61496-1 / 2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| ماحولیاتی مزاحمت: تحفظ کی ڈگری | IP65 (IEC) |
| کنٹرول آؤٹ پٹس (OSSD 1، OSSD 2): آپریشن موڈ | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)(Note) During muting, control output will not turn off even if the beams are interrupted.(Note) When the blanking function is enabled, the operating mode will change. |
| کنٹرول آؤٹ پٹس (OSSD1، OSSD2): پروٹیکشن سرکٹ | Incorporated |
| معاون پیداوار (نان سیفٹی آؤٹ پٹ): آپریشن موڈ | OFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFB-HC handy-controller.) |
| ماحولیاتی مزاحمت: ڈائی الیکٹرک طاقت وولٹیج | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| معاون پیداوار (نان سیفٹی آؤٹ پٹ): پروٹیکشن سرکٹ | Incorporated |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ