![SF4D-H24-01 - SF4D-H24-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D](http://www.baigongbaohao.com/pic/684/797/sf4d-h24-01.jpg)
اسٹاک میں ہاٹ پروڈکٹ
SF4D-H24-01
SF4D-H24-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
$0.00امریکی ڈالر
4771 اسٹاک میں
اہم وضاحتیں
آئٹم:Specifications
پی ایف ایچ ڈی:1.56×10-9
ایم ٹی ٹی ایف ڈی:782 years or more
تبصرہ:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
سپلائر کی معلومات
PANASONIC
پروڈکٹس: 4316
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت
تکنیکی تفصیلات
| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| پی ایف ایچ ڈی | 1.56×10-9 |
| ایم ٹی ٹی ایف ڈی | 782 years or more |
| تبصرہ | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| تفصیلات | Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| پروڈکٹ | Safety Light Curtain [Type 4 PLe SIL3] |
| مواد | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| لوازمات | SF4B-TR25 (test rod) : 1 pc. |
| پارٹ نمبر | SF4D-H24-01 |
| پروڈکٹ کا نام | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| حفاظت کی حالت | Control output (OSSD 1 / 2) OFF state |
| پاور وولٹیج | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| پروڈکٹ نمبر | SF4D-H24-01 |
| سب سسٹم کی قسم | Type B (IEC 61508-2) |
| کیبل کی توسیع | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| فنکشن کو خاموش کرنا | Incorporated (12-core cable) |
| آپریٹنگ رینج | Short mode : 0.2 to 9 m0.656 to 29.528 ftLong mode : 0.8 to 15 m2.625 to 49.213 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| محیطی نمی | 30 to 85 % RH, Storage : 30 to 95 % RH |
| خارج کرنے والا عنصر | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| آلودگی کی ڈگری | 3 |
| جھٹکا مزاحمت | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| جڑنے کا طریقہ | By connector |
| اوور رائڈ فنکشن | Incorporated (12-core cable) |
| حفاظتی اونچائی | 470 mm18.504 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| انٹرلاک فنکشن | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| آپریٹنگ اونچائی | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| اختیاری افعال | Optional functions cannot be used when SF4D-□-01 is used. |
| محیطی روشنی | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| محیطی درجہ حرارت | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| موجودہ کھپت | Emitter : 100 mA or lessReceiver : 130 mA or less |
| کم از کم سینسنگ آبجیکٹ | ø25 mmø0.984 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| پاور سیف فنکشن | Incorporated |
| ٹیسٹ ان پٹ فنکشن | Incorporated |
| بیم چینلز کی تعداد | 24 |
| کمپن مزاحمت | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| ناکامی کے جواب کا وقت | Within response time (OFF response) |
| موصلیت مزاحمت | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| ہم وقت سازی کا طریقہ | Line synchronization / optical synchronization (selectable by DIP switch) |
| مؤثر یپرچر زاویہ | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| لاک آؤٹ ریلیز فنکشن | Incorporated |
| T1 (ثبوت ٹیسٹ وقفہ) | 20 years |
| قابل اطلاق معیارات: جاپان | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) |
| SFF (محفوظ ناکامی کا حصہ) | 99% |
| ایپلیکیشن اشارے کی تقریب | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT (ہارڈویئر فالٹ ٹولرنس) | 1 |
| قابل اطلاق معیار: چین (جی بی) | GB/T 4584 |
| CE نشان زد ہدایت کی تعمیل | Machinery Directive, EMC Directive, RoHS Directive |
| قابل اطلاق معیارات: یورپ (EU) | EN 61496-1/2 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN 50178 |
| کنٹرول آؤٹ پٹس (OSSD 1، OSSD 2) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| مداخلت کی روک تھام کی تقریب | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| قابل اطلاق معیارات: شمالی امریکہ | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| بیرونی آلہ کی نگرانی کی تقریب | Incorporated (8-core cable or 12-core cable) |
| وزن (ایمیٹر اور وصول کنندہ کا کل) | 1,100g approx. |
| معاون پیداوار (AUX) (غیر حفاظتی پیداوار) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| قابل اطلاق معیار: بین الاقوامی معیار | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| کنٹرول آؤٹ پٹ (OSSD 1، OSSD 2): رسپانس ٹائم | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| ماحولیاتی مزاحمت: تحفظ کی ڈگری | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| کنٹرول آؤٹ پٹس (OSSD 1، OSSD 2): آپریشن موڈ | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| کنٹرول آؤٹ پٹس (OSSD1، OSSD2): پروٹیکشن سرکٹ | Incorporated |
| ماحولیاتی مزاحمت: ڈائی الیکٹرک طاقت وولٹیج | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| معاون پیداوار (AUX) (غیر حفاظتی پیداوار): جوابی وقت | OFF response : 60 ms or less, ON response : 60 ms or less |
| معاون آؤٹ پٹ (AUX)(غیر حفاظتی آؤٹ پٹ): آپریشن موڈ | Control output ON : OFF, Control output OFF : ON(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| معاون پیداوار (AUX)(غیر حفاظتی پیداوار): تحفظ سرکٹ | Incorporated |
| حفاظتی اونچائی: چینی پریس مشین کے لیے حفاظتی سامان کے طور پر استعمال کرتے وقت یا جاپانی پریس مشین یا کاغذ کاٹنے والی مشین کے لیے استعمال کرتے وقت | 460 mm18.110 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
پروڈکٹ کی وضاحت
More details
اہم خصوصیات
- صنعتی معیار
- RoHS کے مطابق
- سی ای سرٹیفائیڈ
- 1 سال کی وارنٹی
پروڈکٹ دستاویزات
ڈیٹا شیٹ
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
یوزر مینول
انسٹالیشن اور آپریشن گائیڈ
