


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| کیبل | 0.09 mm24-core cabtyre cable 1 m3.280 ft |
| وزن | Net weight: 15 g approx., Gross weight: 25 g approx. |
| تفصیلات | for ø4 mmø0.156 intube |
| پروڈکٹ | For small diameter tubes Optical Bubble Sensor |
| مواد | Enclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate |
| پارٹ نمبر | BE-A401 |
| پروڈکٹ کا نام | For small diameter tubes Optical Bubble Sensor BE-A |
| پروڈکٹ نمبر | BE-A401 |
| سینسنگ آبجیکٹ | Liquid(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly. |
| سپلائی وولٹیج | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| کیبل کی توسیع | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m65.167 ft. |
| کلیمپنگ ٹارک | 0.5N•m or less |
| ایمیٹر عنصر | Infrared LED(Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| قابل شناخت ہوا خلا | 0.8 mm0.032 inor more(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. |
| موجودہ کھپت | 15 mA or less |
| آپریشن کے اشارے | Orange LED (lights up with absent liquid) |
| حفاظتی سرکٹس | Power supply reverse polarity protection , Output reverse polarity protection |
| قابل اطلاق ٹیوب کی قسم | Transparent resin tube (equivalent to flexible PVC)(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| تعمیل ضابطہ | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| قابل اطلاق ٹیوب dia. (OD×ID) | ø4 mm × ø2.4 mmø5/32 in × ø3/32 in(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| ردعمل کا وقت: بلبلے کا پتہ لگانے پر | 20 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| رسپانس ٹائم: مائع کا پتہ لگاتے وقت | 80 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| آؤٹ پٹ (2 آؤٹ پٹ کے ساتھ شامل) | NPN open-collector transistor•Maximum sink current: 50 mA•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA) |
| ماحولیاتی مزاحمت: تحفظ | IP40 (IEC) |
| ماحولیاتی مزاحمت: محیطی نمی | 35 to 85 % RH, Storage: 35 to 85 % RH |
| ماحولیاتی مزاحمت: جھٹکا مزاحمت | 100 m/s2acceleration in X, Y, and Z directions three times each |
| ماحولیاتی مزاحمت: محیطی روشنی | Fluorescent light: 1,000 ℓx at the light-receiving face |
| ماحولیاتی مزاحمت: محیطی درجہ حرارت | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉(Note) Liquid being detected should also be kept within the rated ambient temperature range. |
| ماحولیاتی مزاحمت: کمپن مزاحمت | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each |
| ماحولیاتی مزاحمت: موصلیت مزاحمت | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| ماحولیاتی مزاحمت: وولٹیج برداشت کرنے کی صلاحیت | 1,000 V AC for between one min. between all supply terminals connected together and enclosure |
| آؤٹ پٹ (2 آؤٹ پٹ کے ساتھ شامل): آؤٹ پٹ آپریشن | Switchable either Liquid-absent-ON or Liquid-present-ON |
| آؤٹ پٹ (2 آؤٹ پٹ کے ساتھ شامل): شارٹ سرکٹ تحفظ | Incorporated |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ