


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| کیبل | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| تبصرہ | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.Oil is used in the factory inspection process for models DPH-L114 and DPH-L154. There may be some residual oil inside the pressure port. |
| وزن | Net weight : 100 g approx., Gross weight : 150 g approx. |
| تفصیلات | Sensor head |
| پروڈکٹ | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| مواد | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| تحفظ | IP67 (IEC) |
| لوازمات | Connector (e-CON) : 1 pc. |
| پارٹ نمبر | DPH-L114 |
| پروڈکٹ کا نام | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| پریشر پورٹ | R1/4 male thread (throttle embeded) |
| جوابی وقت | 1 ms or less |
| پروڈکٹ نمبر | DPH-L114 |
| سپلائی وولٹیج | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| کیبل کی توسیع | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| محیطی نمی | 35 to 85 % RH, Storage : 35 to 85 % RH |
| قابل اطلاق سیال | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| گراؤنڈ کرنے کا طریقہ | Capacitor earth (Enclosure-supply terminal) |
| جھٹکا مزاحمت | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| دباؤ کی قسم | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| جڑنے کا طریقہ | Connector |
| محیطی درجہ حرارت | -20 to +80 ℃ (Pressure port: -20 to +125 ℃\n-4 to +257 ℉, No dew condensation or icing allowed),\n Storage: -30 to +100 ℃-22 to +212 ℉\n[e-CON connector (accesory):-20 to +75 ℃\n-4 to +167 ℉\n(Storage: -30 to +75 ℃-22 to +167 ℉)] |
| موجودہ کھپت | 20 mA or less |
| شرح شدہ دباؤ کی حد | 0 to +10 MPa |
| کمپن مزاحمت | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| ینالاگ وولٹیج آؤٹ پٹ | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 125 ℃-4 to +257 ℉)\n (including linearity, hysteresis and repeatability) |
| موصلیت مزاحمت | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| قابل اطلاق ضوابط | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| درمیانی درجہ حرارت کی حد | -20 to +125 ℃-4 to +257 ℉ |
| وولٹیج برداشت کرنے کی صلاحیت | 150 V AC for one min. between all supply terminals connected together and enclosure |
| دباؤ برداشت کرنے کی صلاحیت | 20 MPa |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ