


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| کیبل | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
| آؤٹ پٹ | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| وزن | Net weight: 15 g approx., Gross weight: 60 g approx. |
| تفصیلات | Amplifier built-in, Pipe-mountable |
| پروڈکٹ | Pipe-mountable Liquid Level Detection Sensor |
| مواد | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| لوازمات | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |
| پارٹ نمبر | EX-F1 |
| پروڈکٹ کا نام | Pipe-mountable Liquid Level Detection Sensor EX-F1 |
| جوابی وقت | 2 ms or less |
| پروڈکٹ نمبر | EX-F1 |
| سینسنگ آبجیکٹ | Liquid(Note):Unclear or highly viscous liquid may not be detected stably. |
| سپلائی وولٹیج | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| کیبل کی توسیع | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable. |
| محیطی نمی | 35 to 85 % RH, Storage: 35 to 85 % RH |
| خارج کرنے والا عنصر | Infrared LED (modulated) |
| جھٹکا مزاحمت | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| محیطی روشنی | lncandescent light: 3,000 lx or less at the light-receiving face |
| محیطی درجہ حرارت | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉(Note:Liquid being detected should also be kept within the rated ambient temperature range.) |
| موجودہ کھپت | 30 mA or less(Note:Unclear or highly viscous liquid may not be detected stably.) |
| آپریشن کے اشارے | Red LED (lights up when the output is ON) |
| کمپن مزاحمت | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| موصلیت مزاحمت | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| آؤٹ پٹ: آؤٹ پٹ آپریشن | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| قابل اطلاق پائپ قطر | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe[PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ](Note:Do not use the sensor with pipes other than the above specified.) |
| وولٹیج برداشت کرنے کی صلاحیت | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| CE نشان زد ہدایت کی تعمیل | EMC Directive, RoHS Directive |
| آؤٹ پٹ: شارٹ سرکٹ تحفظ | Incorporated |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ