


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| کیبل | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| آؤٹ پٹ | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 100 mA sink current) |
| تفصیلات | NPN output |
| پروڈکٹ | Rectangular-shaped Inductive Proximity Sensor |
| مواد | Enclosure: PBTIndicator part: Polyester |
| Hysteresis | 20 % or less of operation distance(with standard sensing object) |
| خالص وزن | 20 g approx. |
| تحفظ | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| پارٹ نمبر | GX-FL15B |
| پروڈکٹ کا نام | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| تکراری قابلیت | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| پروڈکٹ نمبر | GX-FL15B |
| سپلائی وولٹیج | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| کیبل کی توسیع | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| محیطی نمی | 45 to 85 % RH, Storage: 35 to 95 % RH |
| جھٹکا مزاحمت | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| محیطی درجہ حرارت | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| موجودہ کھپت | 15 mA or less |
| آپریشن کے اشارے | Orange LED(lights up when the output is ON) |
| مستحکم سینسنگ رینج | 0 to 6.7 mm0 to 0.264 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.(Note) This is when mounted onto an insulant plate. When mounted onto a steel or stainless steel plate, insert the optional aluminum sheet between the sensor and the plate. |
| کمپن مزاحمت | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| موصلیت مزاحمت | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| زیادہ سے زیادہ آپریشن کا فاصلہ | 8.0 mm0.315 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.(Note) This is when mounted onto an insulant plate. When mounted onto a steel or stainless steel plate, insert the optional aluminum sheet between the sensor and the plate. |
| زیادہ سے زیادہ ردعمل کی تعدد | 150 Hz(Note) This is when mounted onto an insulant plate. When mounted onto a metallic plate, max. response frequency will decrease. |
| آؤٹ پٹ: آؤٹ پٹ آپریشن | Normally closed |
| معیاری سینسنگ آبجیکٹ | Iron sheet 30 × 30 × t 1 mm1.181 × 1.181 × t 0.039 in |
| وولٹیج برداشت کرنے کی صلاحیت | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| آؤٹ پٹ: استعمال کا زمرہ | DC-12 or DC-13 |
| قابل اطلاق ضوابط اور سرٹیفیکیشن | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| سینسنگ رینج کی تبدیلی: وولٹیج کی خصوصیات | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| سینسنگ رینج میں تغیر:درجہ حرارت کی خصوصیات | Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit . |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ