اسٹاک میں ہاٹ پروڈکٹ
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00امریکی ڈالر
4292 اسٹاک میں
اہم وضاحتیں
آئٹم:Specifications
تبصرہ:Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
اسٹروک:10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
وزن:Net weight: 80 g approx.
سپلائر کی معلومات
PANASONIC
پروڈکٹس: 4316
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت
تکنیکی تفصیلات
| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| تبصرہ | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| اسٹروک | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| وزن | Net weight: 80 g approx. |
| تفصیلات | Air-driven type10 mm0.394 intype General purpose |
| پروڈکٹ | Contact-Type Digital Displacement Sensor |
| مواد | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| لوازمات | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| قرارداد | 0.5 μm0.02 mil |
| پارٹ نمبر | HG-S1010-AC |
| پروڈکٹ کا نام | Contact-Type Digital Displacement Sensor HG-S |
| قابل استعمال سیال | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| نمونے لینے کی شرح | 1 ms |
| پروڈکٹ نمبر | HG-S1010-AC |
| قابل اطلاق ٹیوب | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| پیمائش کرنے والی قوت | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| پیمائش کی حد | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| گراؤنڈ کرنے کا طریقہ | Capacitor grounding |
| آلودگی کی ڈگری | 2 |
| ہاٹ سویپ فنکشن | Incorporated |
| آپریٹنگ اونچائی | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| آپریشن کے اشارے | Equipped (2-color LED: Orange / Green) |
| ٹپ انحراف کی رقم | 35 μm1.378 mil(typical value) |
| قابل اطلاق کنٹرولر | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| موصلیت مزاحمت | 100 MΩ or more at 250 V DC |
| ریگولیٹری تعمیل | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| ورکنگ پریشر کی حد | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| اشارے کی درستگی (PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| پوزیشن کا پتہ لگانے کا طریقہ | Optical absolute linear encoder method |
| دباؤ کے خلاف مزاحمت کرنے کی صلاحیت | 0.2 MPa |
| ماحولیاتی مزاحمت: تحفظ | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| ماحولیاتی مزاحمت: محیطی نمی | 35 to 85 % RH, Storage: 35 to 85 % RH |
| ماحولیاتی مزاحمت: جھٹکا مزاحمت | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| ماحولیاتی مزاحمت: محیطی درجہ حرارت | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| ماحولیاتی مزاحمت: کمپن مزاحمت | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
پروڈکٹ کی وضاحت
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
اہم خصوصیات
- صنعتی معیار
- RoHS کے مطابق
- سی ای سرٹیفائیڈ
- 1 سال کی وارنٹی
پروڈکٹ دستاویزات
ڈیٹا شیٹ
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
یوزر مینول
انسٹالیشن اور آپریشن گائیڈ
