سروس کا وقت: پیر سے جمعہ صبح 9:00 سے شام 6:00 تک
UHLAC1 - UHLAC1 HLAC1 HL-AC1 PANASONIC HL-T1 sensor controller, NPN, 12-24VDC
اسٹاک میں ہاٹ پروڈکٹ

UHLAC1

UHLAC1 HLAC1 HL-AC1 PANASONIC HL-T1 sensor controller, NPN, 12-24VDC

$0.00امریکی ڈالر
3192 اسٹاک میں
اہم وضاحتیں
آئٹم:Specifications
قسم:NPN output
وزن:Net weight: 140 g approx.
تفصیلات:Controller (NPN output)
سپلائر کی معلومات
PANASONIC
PANASONIC
پروڈکٹس: 4316
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت

تکنیکی تفصیلات

پیرامیٹرقیمت
آئٹمSpecifications
قسمNPN output
وزنNet weight: 140 g approx.
تفصیلاتController (NPN output)
پروڈکٹUltra-compact Laser Collimated Beam Sensor
موادEnclosure: Polybutylene terephthalateTransparent cover: Polycarbonate
I/O کیبل0.09 mm210-core composite cable, 2 m6.562 ftlong
پارٹ نمبرHL-AC1
ان پٹ کو دوبارہ ترتیب دیں۔0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
پروڈکٹ کا نامUltra-compact Laser Collimated Beam Sensor HL-T1
ٹائمنگ ان پٹ0 V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
لکیری آؤٹ پٹCurrent / voltage output switchable (Note)-During current output: 4 to 20 mA/F.S., Maximum load resistance: 300 Ohm-During voltage output: plus or minus 4 V/F.S., Output impedance 100 Ohm(In the monitor focus function, it can also be set at plus or minus 5 V, 0 to 5 V, etc.)(Note) Switching between current and voltage is accomplished by a switch on the bottom of the controller.
اہم افعال・Measured value display・Setting value, light amount value resolution display・Standard received light setting・Automatic scaling・Scaling・Display reverse・ECO display・Display digits limitation・Sample hold・Peak hold・Bottom hold・Peak to peak hold・Self peak hold・Self bottom hold・Zero reset・Initial reset・ON-delay timer・OFF-delay timer・One-shot timer・Differentiation・Sensitivity selection・Threshold value direct setting・Positioning teaching・2-point teaching・Automatic teaching・Hysteresis width variability・Monitor focus・Non-measuring time setting・(A – B) calculation(Note:The calculation unit is necessary.)・(A + B) calculation(Note:The calculation unit is necessary.)・Mutual interference prevention (Note:The calculation unit is necessary.)・Laser deterioration detection・Key lock・Zero reset memory
پروڈکٹ نمبرHL-AC1
سپلائی وولٹیج12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
لیزر آف ان پٹ0 V connection: Laser emission haltOpen: Laser emission-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
پیمائش کا چکر150 micro s
آلودگی کی ڈگری3 (industrial environment)
زیرو ری سیٹ ان پٹ0 V connection: Zero reset operatesOpen: Zero reset ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
موجودہ کھپت190 mA or less (when connected to the sensor head)
I/O کیبل کی توسیعExtension up to total 10 m32.808 ftis possible, with 0.09 mm2or more, cable.(Note) If the extension cable is longer than 10 m32.808 ft, then it will not qualify for CE marking.
ذیلی ڈیجیٹل ڈسپلے5 digit yellow LED display[RUN mode: Either the resolution or laser beam reception amount will be displayed. THR mode: The threshold value will be displayed., Reverse mode: The display orientation will be reversed.]
مین ڈیجیٹل ڈسپلے5 digit red LED display[RUN mode: Either the measured value (mm) or the hold value will be displayed. Reverse mode: The display orientation will be reversed.]
موصلیت مزاحمت20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure
قابل اطلاق سینسر ہیڈHL-T1001A/T1001F, HL-T1005A/T1005F, HL-T1010A/T1010F
وولٹیج برداشت کرنے کی صلاحیت1,000 V AC for one min. between all supply terminals connected together and enclosure
اشارے: فعال کریں (فعال کریں)Green LED (lights up during normal operation)
اشارے: فیصلے کے نتائجHIGH: Orange LED (lights up when measured value > HIGH threshold value)PASS: Green LED (lights up when HIGH threshold value >= measured value >= LOW threshold value)LOW: Yellow LED (lights up when LOW threshold value > measured value)
اشارے: زیرو ری سیٹ (زیرو)Green LED (lights up when the zero reset function is enabled)
طے شدہ اوسط نمونے لینے کی شرح1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096(Note) The judgment output and linear output and linear output response time is calculated by (Measuring cycle) x (Set average sampling rate + 1).
CE نشان زد ہدایت کی تعمیلEMC Directive, RoHS Directive
فیصلے کے نتائج (ہائی، پاس، کم)NPN open-collector transistor-Maximum sink current: 50 mA-Applied voltage: 30 V DC or less (between judgment output and 0 V)-Residual voltage: 1.2 V or less (at 50 mA sink current)
اشارے: لیزر ایمیٹنگ (ایل ڈی آن)Green LED (lights up during laser emission)
ماحولیاتی مزاحمت: محیطی نمی35 to 85 % RH, Storage: 35 to 85 % RH
ماحولیاتی مزاحمت: جھٹکا مزاحمت300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each
لکیری آؤٹ پٹ: درجہ حرارت کی خصوصیاتplus or minus 0.2 % F.S./℃(Note) These are the temperature characteristics of the linear output when the sensor head is connected.
ماحولیاتی مزاحمت: محیطی درجہ حرارت0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉
ماحولیاتی مزاحمت: کمپن مزاحمت10 to 150 Hz frequency, 0.7 mm0.028 indouble amplitude in X, Y and Z directions for 80 min.
فیصلے کے نتائج (ہائی، پاس، کم): آؤٹ پٹ آپریشنHIGH: ON when measured value > HIGH threshold valuePASS: ON when HIGH threshold value >= measured value >= LOW threshold valueLOW: ON when LOW threshold value > measured value
فیصلے کے نتائج (ہائی، پاس، کم): آؤٹ پٹس کی تعدادHIGH / PASS / LOW 3 values output
فیصلے کے نتائج (ہائی، پاس، کم): استعمال کی قسمDC-12 or DC-13
فیصلے کے نتائج (ہائی، پاس، کم): شارٹ سرکٹ تحفظIncorporated

پروڈکٹ کی وضاحت

HLT1 Series Controller, 12-24 VDC Power, NPN Digital Output, Selectable Analog Output between 4-20mA and ±4V
اہم خصوصیات
  • صنعتی معیار
  • RoHS کے مطابق
  • سی ای سرٹیفائیڈ
  • 1 سال کی وارنٹی

پروڈکٹ دستاویزات

ڈیٹا شیٹ

تکنیکی تفصیلات اور کارکردگی کے ڈیٹا

یوزر مینول

انسٹالیشن اور آپریشن گائیڈ

Top