اسٹاک میں ہاٹ پروڈکٹ
UHLC2C
UHLC2C HL-C2C PANASONIC Control unite HL-C2, high resolution, -5 to +5V, 4-20mA, NPN-type, Export Control
$0.00امریکی ڈالر
4365 اسٹاک میں
اہم وضاحتیں
آئٹم:Specifications
وزن:450 g approx.
تفصیلات:Controller
پروڈکٹ:Ultra High-speed High-precision Laser Displacement Sensor
سپلائر کی معلومات
PANASONIC
پروڈکٹس: 4316
عام طور پر 2-3 کاروباری دنوں میں بھیج دیا جاتا ہے
کوالٹی کی ضمانت
تیز شپنگ
تکنیکی معاونت
تکنیکی تفصیلات
| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| وزن | 450 g approx. |
| تفصیلات | Controller |
| پروڈکٹ | Ultra High-speed High-precision Laser Displacement Sensor |
| مواد | Case: Polycarbonate |
| لوازمات | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| پارٹ نمبر | HL-C2C |
| ان پٹ کو دوبارہ ترتیب دیں۔ | Reset is done when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| الارم آؤٹ پٹ | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between alarm output and Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| پروڈکٹ کا نام | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| ٹائمنگ ان پٹ | ON at/during connection to Common (-)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| نمونے لینے کی شرح | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| اسٹروب آؤٹ پٹ | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between strobe output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| پروڈکٹ نمبر | HL-C2C |
| سپلائی وولٹیج | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| زیرو سیٹ ان پٹ | Zero set is ON when connected with Common (-).Zero set turns to OFF after continuously connected to Common (-) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| اشارے: پاور | Green LED (lights up at power on) |
| موجودہ کھپت | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| اشارے: الارم 1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| اشارے: الارم 2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| لیزر کنٹرول ان پٹ | Laser emission is stopped when connected to Common (-).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| میموری کی تبدیلی کا ان پٹ | Memory is specified when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| کنیکٹیل سینسر ہیڈ | Number of connectable units: Max. 2 units. |
| ریموٹ انٹر لاک ان پٹ | Laser emission is delayed when connected to Common (-).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| ینالاگ آؤٹ پٹ: موجودہ | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| ینالاگ آؤٹ پٹ: وولٹیج | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| ججمنٹ آؤٹ پٹ (HI, GO, LO) | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between judgment output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| الارم آؤٹ پٹ: آؤٹ پٹ آپریشن | Opened when the amount of light is insufficient |
| اسٹروب آؤٹ پٹ: آؤٹ پٹ آپریشن | Opened at data determination |
| الارم آؤٹ پٹ: شارٹ سرکٹ تحفظ | Incorporated |
| اسٹروب آؤٹ پٹ: شارٹ سرکٹ تحفظ | Incorporated |
| اشارے: سینسر ہیڈ ایک لیزر تابکاری | Green LED (lights up during or immediately before laser emission of sensor head A) |
| اشارے: سینسر ہیڈ بی لیزر تابکاری | Green LED (lights up during or immediately before laser emission of sensor head B) |
| ماحولیاتی مزاحمت: محیطی نمی | 35 to 85 %RH |
| ماحولیاتی مزاحمت: جھٹکا مزاحمت | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| ماحولیاتی مزاحمت: محیطی درجہ حرارت | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| ججمنٹ آؤٹ پٹ (HI, GO, LO): آؤٹ پٹ آپریشن | Opened at output operation |
| ماحولیاتی مزاحمت: کمپن مزاحمت | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| ججمنٹ آؤٹ پٹ (HI, GO, LO): شارٹ سرکٹ پروٹیکشن | Incorporated |
پروڈکٹ کی وضاحت
High performance analog laser high resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, NPN digital output
اہم خصوصیات
- صنعتی معیار
- RoHS کے مطابق
- سی ای سرٹیفائیڈ
- 1 سال کی وارنٹی
پروڈکٹ دستاویزات
ڈیٹا شیٹ
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
یوزر مینول
انسٹالیشن اور آپریشن گائیڈ
