


| پیرامیٹر | قیمت |
|---|---|
| آئٹم | Specifications |
| کیبل | 0.15 mm25-core cabtyre cable, 2 m6.562 ftlong |
| وزن | Net weight: 65 g approxGross weight: 75 g approx |
| تفصیلات | Amplifier (Cable type) |
| پروڈکٹ | Digital Laser Sensor |
| مواد | Enclosure: Heat-resistant ABSTransparent cover: PolycarbonatePush button switch: AcrylicJog switch: ABS |
| پارٹ نمبر | LS-401-C2 |
| پروڈکٹ کا نام | Digital Laser Sensor LS-400 |
| جوابی وقت | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
| موڈ اشارے | RUN: Green LEDTEACH, L/D, TIMER, CUST, PRO: Yellow LED |
| پروڈکٹ نمبر | LS-401-C2 |
| سپلائی وولٹیج | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| ٹائمر فنکشن | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
| کیبل کی توسیع | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| ڈیجیٹل ڈسپلے | 4 digit (green) + 4 digit (red) LED display |
| محیطی نمی | 35 to 85 % RH, Storage: 35 to 85 % RH |
| اشارے کا انتخاب کریں۔ | Yellow LED(lights up when either output 1 or output 2 is selected) |
| جھٹکا مزاحمت | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| محیطی درجہ حرارت | -10 to +55 ℃+14 to +131 ℉(If 4 to 7 units are mounted close together: -10 to +50 ℃+14 to +122 ℉, if 8 to 16 units are mounted close together: -10 to +45 ℃+14 to +113 ℉)(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| موجودہ کھپت | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
| آپریشن کے اشارے | Orange LED (lights up when output 1 and output 2 are ON) |
| حساسیت کی ترتیب | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustmentWindow comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentHysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustmentDifferential mode: 5-level settings |
| ٹائمر فنکشن: ٹائم | 1 to 9,999 ms |
| کمپن مزاحمت | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| موصلیت مزاحمت | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| لیزر اخراج اشارے | Green LED (lights up during laser emission) |
| وولٹیج برداشت کرنے کی صلاحیت | 1,000 V AC for one min.between all supply terminals connected together and enclosure |
| آؤٹ پٹ (آؤٹ پٹ 1، آؤٹ پٹ 2) | NPN open-collector transistor- Maximum sink current: 100 mA (Note)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current](Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
| ٹھیک سنویدنشیلتا ایڈجسٹمنٹ تقریب | Incorporated |
| خودکار مداخلت کی روک تھام کی تقریب | Incorporated[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
| آؤٹ پٹ (آؤٹ پٹ 1، آؤٹ پٹ 2): آؤٹ پٹ آپریشن | Selectable either Light-ON or Dark-ON, with jog switch |
| آؤٹ پٹ (آؤٹ پٹ 1، آؤٹ پٹ 2): شارٹ سرکٹ پروٹیکشن | Incorporated |
| بیرونی ان پٹ (لیزر کے اخراج کو روکنا مکمل آٹو ٹیچنگ / لمیٹ ٹیچنگ) | NPN non-contact input- Signal conditionHigh: +5 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
تکنیکی تفصیلات اور کارکردگی کے ڈیٹا
انسٹالیشن اور آپریشن گائیڈ